Jump N Start 2000 Amp Power Station with 100W Inverter

The Battery Tender® 2000 Amp Power Station is the portable jump starter that does everything else too. 2000 peak Amps of lithium cranking power for any 12V gas or diesel engine up to V8, a 100-watt AC inverter for running electronics and small appliances anywhere there is no outlet, three USB outputs for simultaneous device charging, and a 16,000mAh battery pack built for multiple jump starts and extended power delivery. The best portable jump starter for drivers, campers, overlanders, and anyone who needs backup power beyond what a phone charger provides.

2000 Peak Amps — Maximum Portable Jump Starting Power

2000 peak Amps handles the hardest starts — large diesel trucks, full-size SUVs, high-compression engines, cold-weather starts, and deeply discharged batteries in vehicles that have defeated smaller jump starters. Spark-proof connection technology and reverse polarity protection confirm the connection before any current flows, regardless of lighting or urgency.

100-Watt AC Inverter — Wall Power Anywhere

The integrated 100W AC inverter converts the 16,000mAh lithium battery pack to standard 120V AC output — powering laptops, power tools, CPAP machines, LED work lights, and any device that requires a wall outlet. For job sites, camping trips, overlanding, tailgating, boat trips, and power outages, the 100W inverter transforms this portable jump starter into a portable power station in a glove-compartment-sized unit.

This is what separates the 2000 Amp Power Station from the standard 2000 Amp jump starter — AC power output. For anyone who has ever needed to charge a laptop, run a small appliance, or power equipment away from an outlet, the inverter is the decisive feature.

How to Jump Start a Car Without Jumper Cables

Portable lithium jump starters are faster, safer, and more reliable than traditional jumper cables:

1. Connect the red clamp to the positive (+) terminal on the dead battery
2. Connect the black clamp to a ground point or the negative (−) terminal
3. Spark-proof technology confirms polarity before current flows — reverse polarity protection prevents damage from incorrect connections
4. Start the vehicle — most engines start within 1–3 attempts; crank for up to 5 seconds and wait 30 seconds between attempts
5. Once running, disconnect and store

No second vehicle needed. No cable management. 2000 peak Amps handles the full range of gas and diesel engines in one compact portable unit.

Three USB Outputs — Charge Multiple Devices Simultaneously

Three USB charging ports deliver simultaneous fast charging for phones, tablets, and accessories from the same 16,000mAh battery that powers the jump starter and inverter. The combination of USB outputs, the 100W AC outlet, and 2000 peak Amp jump starting covers virtually every power need in one portable battery jump starter pack.

Portable Power Applications Beyond Jump Starting

• Laptops and work equipment on remote job sites
• CPAP and medical devices during travel or power outages
• LED work lighting for emergency roadside repairs
• Camping and overlanding power for small appliances
• Tailgating and outdoor events
• Emergency backup power during home outages

Compatible Vehicles

• Full-size trucks, diesel pickups, and commercial vehicles
• Large SUVs and passenger cars
• Motorcycles and touring bikes
• Boats and marine vessels
• RVs and campers
• ATVs, UTVs, and off-road vehicles
• Any 12V gas engine up to V8 or diesel engine up to 8.0L

Safety Features

• Spark-proof clamp technology — no current flows until connection is confirmed correct
• Reverse polarity protection — alerts and prevents current flow if clamps are reversed
• 100W AC inverter surge protection
• Overcurrent protection
• Short-circuit protection
• Over-temperature protection

1-Year Limited Warranty | DeLand, Florida Since 1965