Skip to product information
1 of 5

Aqua-Hot Gen1 Air/Water Heater

Aqua-Hot Gen1 Air/Water Heater

Regular price $3,435.10
Regular price Sale price $3,435.10
Sale Sold out
Free Shipping | Delivery ETA: 3-5 Days
Shipping calculated at checkout.
View full details

The Gen1 from Aqua-Hot is a direct replacement for the Truma Combi.

It's multi-purpose appliance designed to save space and weight in a vehicle while still providing the highest level of climate comfort as well as 2.64 G of hot water.

The Aqua-Hot Gen1 can heat water independently of the furnace, keeping owners comfortable year-round and ensuring they’re always ready for a luxurious hot shower from anywhere on the road. Warm air flows into the coach’s interior through 4 air outlets where it is distributed evenly and efficiently for a consistently comfortable internal temperature.

The Aqua-Hot Gen1 is rated for high altitude operation up to 15,000 feet above sea level – compared to competitive models that are only rated up to 4,000 feet.

Gen1 uses RV-C Open-Source intelligence for user-friendly control and easy integration into your application.

A Heating and Hot Water Heater System

  • - All-in-one heater - combines both air and water heating in one compact unit
  • - High altitude rated and auto adjusting up to 15,000 ft
  • - No Anode Design - no maintenance
  • - Easy-to-use Controls - LCD control screen is intuitive and adaptable
  • - Automated Timer
  • - 4 Heating Fan Speeds - balanced distribution of warm air
  • - 10 Air Circulation Fan Speeds
  • - Open Source/ RVC ready 
  • - Three fuel options - can be powered by propane, gas, or diesel 
  • - Shore power heating - when available, use shore power to heat so you can save on fuel
  • - Complete installation kit - includes everything needed for a typical application 
  • - Made in the USA - Colorado
  • - Two-year limited warranty - must be installed by a certified shop. Contact us to coordinate your install with a RackUp+Go partner in your area. 

 

Gen1 Propane

Gen1 Gas

Gen1 Diesel

Hot Water Capacity

2.64 G stainless steel tank

2.64 G stainless steel tank

2.64 G stainless steel tank

Time to Heat the Water Tank

20 Minutes

20 Minutes

20 Minutes

Fuel Type

Propane

Gasoline

Diesel

Heating Output

20,000 BTU/hr

13,500 BTU/hr

13,500 BTU/hr

Heat Output on Electric

6,000 BTU/hr

6,000 BTU/hr

6,000 BTU/hr

Fuel Consumption (maximum)

.35 to 1.05 lb/hr

.19 gal/hr

.16 gal/hr

Power Supply

12 V DC - 110 V AC

12 V DC - 110 V AC

12 V DC - 110 V AC

Current Draw (maximum)

15.6 A

15.6 A

15.6 A

Dimensions (L x W x H)

20.1" x 17.7" x 11.8"

20.1" x 17.7" x 11.8"

20.1" x 17.7" x 11.8"

Weight (Without Water)

34.4 lbs

34.4 lbs

34.4 lbs

Air Flow Rate

169 CFM

169 CFM

169 CFM

Altitude Operating Range

Up to 15,000 ft

Up to 15,000 ft

Up to 15,000 ft

Included in this kit:

  • Heater w/ electric heating element
  • 12V DC power cable
  • Control panel w/ wiring
  • Terminals/connectors
  • Room temperature sensor (thermistor)
  • Air intake/exhaust
  • Air intake/exhaust port and sealing gasket
  • Air intake/exhaust mounting clip
  • C-clip and clamp for exhaust tubing
  • Air duct mounting brackets
  • Fixed louver/vents for heated air
  • Adjustable louver/vents for heated air
  • Fuel pump assembly
  • Push-to-connect fittings (10mm OD 1/2″ BSPP)
  • 1/2″ PEX x 1/2″ NPT male (brass)
  • 1/2″ PEX x 1/2″ NPT female (brass)
  • Water check valve
  • 40 PSI water pressure regulator
  • Fuel standpipe/pickup
  • 4.1mm ID fuel line couplers
  • 3.5 ID fuel line couplers
  • Fuel line check valve
  • Fuel pump mount
  • 9-11mm fuel line clamps
  • 8-10mm fuel line clamps
  • 70-90mm work drive clamps
  • Air distribution cap
  • 7.89mm SAE – 4mm fuel line elbow
  • Exhaust vent
  • Control knob
  • 4 meter (13′) lengths of heated air ducting
  • 6.8 meters (22′) clear fuel line hose (2mm ID, 4MM OD) (pump to system)
  • 1.2 meters (3.9′) blue fuel line hose (1.5mm ID, 5mm OD) (fuel tank to pump)
  • Fuel pump wiring – 6.8 meters (22′)
  • Various misc. fasteners

Included in this kit:

  • Heater w/ electric heating element
  • 12V DC power cable
  • Control panel w/ wiring
  • Terminals/connectors
  • Room temperature sensor (thermistor)
  • Air intake/exhaust
  • Air intake/exhaust port and sealing gasket
  • Air intake/exhaust mounting clip
  • C-clip and clamp for exhaust tubing
  • Air duct mounting brackets
  • Fixed louver/vents for heated air
  • Adjustable louver/vents for heated air
  • Fuel pump assembly
  • Push-to-connect fittings (10mm OD 1/2″ BSPP)
  • 1/2″ PEX x 1/2″ NPT male (brass)
  • 1/2″ PEX x 1/2″ NPT female (brass)
  • Water check valve
  • 40 PSI water pressure regulator
  • Fuel standpipe/pickup
  • 4.1mm ID fuel line couplers
  • 3.5 ID fuel line couplers
  • Fuel line check valve
  • Fuel pump mount
  • 9-11mm fuel line clamps
  • 8-10mm fuel line clamps
  • 70-90mm work drive clamps
  • Air distribution cap
  • 7.89mm SAE – 4mm fuel line elbow
  • Exhaust vent
  • Control knob
  • 4 meter (13′) lengths of heated air ducting
  • 6.8 meters (22′) clear fuel line hose (2mm ID, 4MM OD) (pump to system)
  • 1.2 meters (3.9′) blue fuel line hose (1.5mm ID, 5mm OD) (fuel tank to pump)
  • Fuel pump wiring – 6.8 meters (22′)
  • Various misc. fasteners
Inventory
Large Inventory

Expertly Curated

Free Shipping
Free Shipping

Fast & Free Shipping

Inventory
Price Guarantee

RackUp PRO Deals

30-Day Return
30-Day Returns

Hassle-Free Returns

Questions?
Got Questions?

We're here to help!