The Gen1 from Aqua-Hot is a direct replacement for the Truma Combi.

It's multi-purpose appliance designed to save space and weight in a vehicle while still providing the highest level of climate comfort as well as 2.64 G of hot water.

The Aqua-Hot Gen1 can heat water independently of the furnace, keeping owners comfortable year-round and ensuring they’re always ready for a luxurious hot shower from anywhere on the road. Warm air flows into the coach’s interior through 4 air outlets where it is distributed evenly and efficiently for a consistently comfortable internal temperature.

The Aqua-Hot Gen1 is rated for high altitude operation up to 15,000 feet above sea level – compared to competitive models that are only rated up to 4,000 feet.

Gen1 uses RV-C Open-Source intelligence for user-friendly control and easy integration into your application.

A Heating and Hot Water Heater System

- All-in-one heater - combines both air and water heating in one compact unit
- High altitude rated and auto adjusting up to 15,000 ft
- No Anode Design - no maintenance
- Easy-to-use Controls - LCD control screen is intuitive and adaptable
- Automated Timer
- 4 Heating Fan Speeds - balanced distribution of warm air
- 10 Air Circulation Fan Speeds
- Open Source/ RVC ready
- Three fuel options - can be powered by propane, gas, or diesel
- Shore power heating - when available, use shore power to heat so you can save on fuel
- Complete installation kit - includes everything needed for a typical application
- Made in the USA - Colorado
- Two-year limited warranty - must be installed by a certified shop. Contact us to coordinate your install with a RackUp+Go partner in your area.

	Gen1 Propane	Gen1 Gas	Gen1 Diesel
Hot Water Capacity	2.64 G stainless steel tank	2.64 G stainless steel tank	2.64 G stainless steel tank
Time to Heat the Water Tank	20 Minutes	20 Minutes	20 Minutes
Fuel Type	Propane	Gasoline	Diesel
Heating Output	20,000 BTU/hr	13,500 BTU/hr	13,500 BTU/hr
Heat Output on Electric	6,000 BTU/hr	6,000 BTU/hr	6,000 BTU/hr
Fuel Consumption (maximum)	.35 to 1.05 lb/hr	.19 gal/hr	.16 gal/hr
Power Supply	12 V DC - 110 V AC	12 V DC - 110 V AC	12 V DC - 110 V AC
Current Draw (maximum)	15.6 A	15.6 A	15.6 A
Dimensions (L x W x H)	20.1" x 17.7" x 11.8"	20.1" x 17.7" x 11.8"	20.1" x 17.7" x 11.8"
Weight (Without Water)	34.4 lbs	34.4 lbs	34.4 lbs
Air Flow Rate	169 CFM	169 CFM	169 CFM
Altitude Operating Range	Up to 15,000 ft	Up to 15,000 ft	Up to 15,000 ft

Downloads

Data Sheet

Included in this kit:

Heater w/ electric heating element
12V DC power cable
Control panel w/ wiring
Terminals/connectors
Room temperature sensor (thermistor)
Air intake/exhaust
Air intake/exhaust port and sealing gasket
Air intake/exhaust mounting clip
C-clip and clamp for exhaust tubing
Air duct mounting brackets
Fixed louver/vents for heated air
Adjustable louver/vents for heated air
Fuel pump assembly
Push-to-connect fittings (10mm OD 1/2″ BSPP)
1/2″ PEX x 1/2″ NPT male (brass)
1/2″ PEX x 1/2″ NPT female (brass)
Water check valve
40 PSI water pressure regulator
Fuel standpipe/pickup
4.1mm ID fuel line couplers
3.5 ID fuel line couplers
Fuel line check valve
Fuel pump mount
9-11mm fuel line clamps
8-10mm fuel line clamps
70-90mm work drive clamps
Air distribution cap
7.89mm SAE – 4mm fuel line elbow
Exhaust vent
Control knob
4 meter (13′) lengths of heated air ducting
6.8 meters (22′) clear fuel line hose (2mm ID, 4MM OD) (pump to system)
1.2 meters (3.9′) blue fuel line hose (1.5mm ID, 5mm OD) (fuel tank to pump)
Fuel pump wiring – 6.8 meters (22′)
Various misc. fasteners

Country/region

Collection: Aqua-Hot

Filter and sort

Filter

Sort by

Aqua-Hot Gen1 Air/Water Heater

Aqua-Hot Gen1 Air/Water Heater