• EcoFlow Power Hub - a 3600W pure sine inverter-charger that has a maximum AC output of an amazing 7200W, dual MPPT solar charge controllers, a DC/DC converter, DC/DC battery charger, and plug-in input/output ports for solar, alternator, battery and generator charging.

• EcoFlow Power Kit Console - a 7" full-color LCD touchscreen for control and monitoring of all electrical system inputs and outputs. 

• EcoFlow AC/DC Distribution Panel - The 3-component panel is built for 6 AC circuits and 12 DC circuits. It includes a transparent exterior faceplate, removable interior face panel, and a deep connection box with knockouts and WAGO-style circuit connectors.

• EcoFlow Battery - The 48-volt lithium EcoFlow batteries are available in 2 kWh or 5 kWh. These batteries are long-life lithium iron phosphate (LiFePO4), with an operating temperature from -4°F to 122°F due to the built in auto-heating feature. A 5 kWh EcoFlow Power Kit has one 5 kWh battery. Note that you can connect up to three 2 kWh or 5 kWh batteries in your power system, but you cannot mix and match the two sizes.

The Independence Power Kit is a completely plug-and-play off-grid power solution. It comes with all the cables you'll need to connect these components and your charging sources. Most of the cables are 15 feet long, solar and alternator charging cables are 20 feet long, and battery cables are 5-8 feet long.

Why EcoFlow Power Kits?

Many van converters design custom electrical systems. Often times, these systems are quite complex and expensive, requiring countless hours of research and design. After installation, troubleshooting a custom system like this can be difficult. 

EcoFlow Power Kits offer:

Plug-and-Play - EcoFlow Power Kits offer a simplified system that comes with all the necessary cabling between the components and charging sources, and doesn't require design experience or specialized tools. Most van converters estimate that an EcoFlow Power Kit reduces their power system installation times from 10-20 hours down to 2-3 hours. Need more capacity? Simply plug in another battery, or plug in more solar panels for faster battery charging.

Four Charging Methods, Up to 6000W - An EcoFlow Power Kit enables you to use any combination of the charging methods, including solar, alternators, shore power and generators.

• Solar - EcoFlow Power Kits allow as much solar power as you can fit on your roof. Three ports allow for up to 1600W of solar charging on each port, up to 4800W total. EcoFlow offers 100W and 400W rigid solar panels that can be mounted on the roof of your van, and you can even supplement these with additional portable panels.

• Alternator - Three ports can be used for alternator charging, 1600W each, up to 4800W total. Charge the system with single or dual alternators from 12-60V.

• Generator - Connect an EcoFlow Dual-Fuel Smart Generator (or any other brand of generator) for up to 1800W of charging.

• Shore Power - Connect a 30A shore power source for charging from RV park/campground power.

Compact & Integrated Design - Unlike other power systems, EcoFlow Power Kits combine five components into one Power Hub, supporting all of your power needs, saving you space, money, and set-up time. EcoFlow 2kWh and 5kWh batteries securely stack, giving you an expandable capacity of up to 15kWh. A large battery bank like this (the equivalent of a 1200 Ah 12V bank) would require very large cables and substantial space for all those batteries with most electrical systems. With EcoFlow components, it's just 3 battery cables and 3 batteries that plug into the Power Hub in seconds. Cable management is already done for you.

Space-Saving Solutions - To save valuable space, EcoFlow reduced down the traditional power kit size, integrating components together, safely utilizing thinner wires, providing a smaller power solution and a stackable battery design with integrated cabling. Want to hide your electrical components? You can conveniently conceal the Power Hub, batteries and other accessories so that the entire system is out of sight, under your seats or in a closet.

Smart Controls - Monitor your power with a plethora of setting options and real-time data tracking accessible from the EcoFlow app and/or the Power Kit Console.

FREE SHIPPING on this item anywhere in the lower 48.

KEY FEATURES: ECOFLOW POWER KIT (5 KWH)

• Supports up to 6000W of charging through a combination of 4 methods: up to 4800W solar, 4800W alternator, 3000W shore power, and 1800W Smart Generator input.

• Plug-and-play for simple installation

• Compact, all-in-one Power Hub combines 5 components

• Save space with stackable batteries

• 48V system, a safer, compact power solution

• Real-time and remote smart controls

• Made in USA

• 5-year system warranty

SPECS

Power Kit Downloads

• EcoFlow LFP Battery User Manual
• EcoFlow Power Hub User Manual
• EcoFlow Power Kit Console User Manual
• EcoFlow AC/DC Smart Distribution Panel User Manual

VELIT 2000R

* One-year limited warranty

SPECS

FAQs

Can I install a RV air conditioner myself?

• While it is possible to install an RV air conditioner yourself, it is recommended that you hire a professional to ensure that it is installed correctly and safely.

Can I use my RV air conditioner while driving?

• Yes, you can use your RV air conditioner while driving, but it is recommended that you only use it on generator power and not on battery power to avoid draining the battery.

What size RV air conditioner do I need?

• The size of the RV air conditioner you need depends on the size of your RV and the climate in which you will be using it. A general rule of thumb is to have one 13,500 BTU air conditioner for every 350 square feet of living space.

Can I run my RV air conditioner on solar power?

• Yes, it is possible to run an RV air conditioner on solar power, but it requires a large solar panel system and battery bank. It is also important to note that running an air conditioner on solar power may drain the battery quickly.

How often should I clean my RV air conditioner filters?

• RV air conditioner filters should be cleaned or replaced at least once a month during heavy use to maintain proper airflow and performance.
  

VELIT 2000R Downloads

• User Manual

48V Power Kit 48V A/C Cable

No more complicated wiring diagrams, no need for bus bars - with the new 48V Air Conditioner Cable you can immediately pair your EcoFlow Power Kit with a 48-volt RV air conditioner.

When we first learned of EcoFlow's magical Power Hub and how all the typical camper van power electronics -- inverter, charge controllers, DC/DC charger, DC/DC converter, transfer switch -- were combined into one compact package, we also learned the Power Hub could, theoretically, have a 48V RV air conditioner connected directly to a battery port. We couldn't stop until we tested it ourselves.

Our 48V air conditioner cable is designed to plug directly into the EcoFlow Power Hub. On one end, the cable has an integrated EcoFlow battery port plug, the other end has two bare 4 AWG conductors. To connect to your 48V air conditioner, the cable requires an inline fuse along the positive wire, but the bare ends allow you the flexibility to use butt connectors, Anderson connectors, or whatever connectors you choose. With our 48V cable you don't need tools like king-size hydraulic crimpers, cutters, heat guns, or any of the other usual difficulties with building large-gauge DC cables.

The 48V air conditioner cable plugs into one of the Power Hub battery ports, so you'll still have the two other battery ports free on the Power Hub, enabling you to have either a 4 kWh system (with 2 x  2 kWh batteries) or a 5 or 10 kWh system (with either 1 or 2 x 5 kWh batteries).

NOTE: A new EcoFlow firmware update -- available now (Updated: October 22, 2023) -- incorporates the new 48V cable's power draw. 

The 20 ft 48V Air Conditioner Cable plugs directly into the EcoFlow Power Hub, receiving 48V power supply directly and allowing you to choose the DC output from your Smart AC/DC Distribution Panel to either be 12V or 24V as needed. Once you know what DC loads you will be connecting to your distribution panel, you'll set the DC voltage to either 12V or 24V. 

To keep it simple: power efficiency. A 48V system uses less current to supply the same appliance than 24V and 12V systems, meaning thinner wires can be used and less heat generated in the system. 

Additionally, the voltage will not affect the cooling BTU rating. All A/C units with the same BTU rating will operate with the same cooling efficiency; however, the voltage rating will affect the power consumption. 

12V appliances typically will pull more power vs. 24V appliances and the same is true for 24V over 48V, so adding in a 48V air conditioner directly to your Power Hub lets you have a maximum power rating -- and -- a Smart AC/DC Distribution Panel that offers a built in step-down for either DC 24V or 12V loads.

Premium Dual Layer Gasket for Velit 2000R

Upgrade your Velit rooftop air conditioner with our Premium Dual Layer Foam Gasket. Specifically designed for rooftop models, this 1-7/8" thick gasket can be easily notched to fit the roof of any van.

Our premium foam gasket features a dual-layer design for superior performance. The top layer is made of high-density closed-cell foam that provides an excellent seal, preventing air leaks and enhancing the efficiency of your AC unit. The bottom layer consists of a lower density open-cell foam that offers exceptional sound dampening, reducing operational noise for a quieter environment.

The gasket comes as a one-piece design with a self-adhesive backing tape for easy installation. For a leak-proof seal, we recommend using a silicone sealant.

Please note, this gasket is an upgraded premium product and is not included with a Velit A/C unit.

Dimensions (L x W x D):

• From the outer edge of the gasket: 19.5" x 23-1/8" x 1-7/8"
• From the inner edge of the gasket: 15.5" x 19" x 1-7/8" *Please note, dimensions are measured by hand and there may be small discrepancies

Shop More Power Kit + VELIT Bundles