ROAMiQ × Victron STACK
ROAMiQ × Victron STACK: The Smart, Pre-Wired Power and Control System the Vehicle Market Has Been Missing
If the market has taught builders and DIYers anything, it’s this: most vehicle electrical systems are still being sold as parts lists. We think power systems should be delivered ready to go.
This gap is exactly where the ROAMiQ × Victron STACK fits.
For years, the vehicle power market has pushed customers into one of two options.
On one side, you have fully custom builds: powerful, flexible, and often beautifully executed, but time-intensive to design, wire, configure, and troubleshoot. On the other side, you have more consumer-style plug-and-play systems: simpler to install, but frequently more restrictive, less flexible, and more likely to lock the user into a closed hardware path.
What has been missing is a serious middle ground: a vehicle-grade power architecture that is pre-built, organized, configured, and positioned to become the central nervous system of the vehicle.
This is where the ROAMiQ × Victron STACK lives.
The Existing Problem in the Market
Most premium vehicle builds still suffer from the same core problem: fragmentation.
Even in expensive, highly customized vans, RVs, expedition rigs, fleet vehicles, and specialty builds, the systems often feel disconnected in real-world daily use. One controller for the inverter. A separate app handles the battery. A different thermostat controls heating. Lighting lives on a separate controller. Tank sensors are somewhere else. Cameras are in another interface. Remote access, if it exists, often depends on a patchwork of independent products rather than one coherent system.
That creates two different kinds of friction.
First, it creates installation friction. Builders and installers spend time mounting components, routing cable, terminating lugs, solving layout constraints, protecting circuits, and configuring each subsystem individually.
Second, it creates user friction. Once the build is finished, the owner still has to manage a collection of systems rather than one vehicle-wide experience.
This is one of the most under-addressed issues in the market today.
The hardware in modern mobile power systems has improved dramatically. Inverters are better. Lithium batteries are better. DC-DC charging is better. Solar charging is better. Sensors are better. Cameras are better. But too often, the user experience still feels like a collection of products that were never designed to work together.
ROAMiQ was built to solve that.
What ROAMiQ Is
ROAMiQ is the control and monitoring layer of the vehicle. It's the brain.
It is not just another monitor. It is not just a prettier dashboard. And it is not just another app competing for space on your phone.
ROAMiQ is designed to unify supported systems into one single interface, allowing the customer to monitor, control, and automate everything from one environment.
At a practical level, that means ROAMiQ can serve as the place where users interact with supported power systems, lighting, air conditioners, heaters, tank monitors, temperature sensors, cameras, and many other networked and integrated components. The current ROAMiQ compatible products page already lists supported, or upcoming support, across power systems, air conditioners, air heaters, vent fans, water heaters, water pumps, awnings, refrigerators, temperature sensors, tank sensors, and security cameras.
View the current ROAMiQ-compatible products list.
ROAMiQ transforms simple products into something much more useful: a fully intelligent vehicle operating system.
What the ROAMiQ × Victron STACK Actually Is
The ROAMiQ × Victron STACK is a bench-built, stacked Victron power and ROAMiQ integrated system designed to eliminate the time, space, and variability of traditional on-vehicle power builds.
Instead of shipping a pile of components that still need to be laid out, internally wired, configured, and tested on the vehicle, the STACK platform arrives as a compact, low-profile assembly that is already pre-mounted, pre-wired, pre-configured, and fully tested.
That distinction is critical.
It means this is not about merely convenience. The point here is to create a faster, cleaner, more repeatable path to a smart, serviceable, professionally deployed vehicle system.
Why the Victron Backbone Matters
One of the strongest aspects of the STACK platform is that it is built around Victron hardware.
This gives customers a foundation based on a globally respected mobile and off-grid power ecosystem rather than a closed proprietary architecture.
For many serious builders, that matters for several reasons:
- Victron systems are modular.
- Victron systems are well known in the mobile power world.
- Victron systems are easier to customize than many closed kits.
- Victron systems are easier to scale for different battery, charging, and distribution needs.
- Victron-based architectures are familiar to many installers, upfitters, and support teams across the world.
With this kit, ROAMiQ is not replacing that backbone. It builds on it.
The customer gets the benefit of a mature power ecosystem while also gaining the control, visibility, and integration layer that traditional power-only builds lack.
Why the STACK Format Solves Real Build Problems
Traditional wall-mounted power systems can consume a large amount of cabinet or utility-bay space. Spacing, routing, and physical organization all require planning. Cable runs become longer. Variability increases. Installers must make dozens of micro-decisions that affect access, serviceability, airflow, and final appearance.
The ROAMiQ × Victron STACK addresses this by consolidating AC power, DC distribution, charging sources, monitoring, and protection into a compact structural assembly. Components are vertically stacked with optimized conductor lengths and fixed routing paths so the finished system occupies dramatically less space than many traditional wall-spread builds.
The result is a system that behaves more like a power appliance than a custom wiring project.
Thermal Management: Why the Bracket Design Matters
One of the smartest engineering choices in the STACK system is the way the mounting bracket addresses cooling.
The bracket is designed to install directly over the inverter/charger while preserving the recommended four inches of clearance around the inverter. At the same time, the structure incorporates dedicated cooling fans that synchronize with the inverter’s internal fan operation.
That means the cooling strategy is not an afterthought. It is built into the mounting architecture itself.
As inverter load and temperature increase, the bracket-mounted fans activate in tandem to move air across the system. This reduces heat buildup in tighter installations and helps support more consistent performance in cabinets and utility spaces where airflow is always a concern.
For serious builders, this is important because compact packaging is only useful if the thermal strategy still makes sense. The STACK platform is designed to deliver both density and airflow.
Bench-Built, Pre-Wired, Pre-Configured, and Tested
A major value driver of the ROAMiQ × Victron STACK is what happens before the product ever arrives at the vehicle.
Each STACK is assembled on the bench, wired, electrically verified, inspected, pre-configured, and tested for proper logic and system behavior. Internal circuits are completed using properly sized cable, crimped terminals, and heat-shrink.
This offers several practical benefits:
- Less install variability
- Less layout guesswork
- Less time spent on repetitive internal wiring
- Faster installation in the vehicle
- Cleaner final presentation
- More repeatable outcomes across multiple builds
That is especially useful for upfitters, OEM-style production teams, and fleet-oriented builders, but it is also highly valuable for advanced DIY customers who want professional-grade results without rebuilding the same electrical architecture from scratch.
The 12V ROAMiQ × Victron STACK: Included Components
The current 12V ROAMiQ × Victron STACK includes the following major hardware and system elements:
- Modular Mounting Bracket
- ROAMiQ Control Hub
- 5 Zone Lighting Controller
- Victron MultiPlus-II 12/3000/120-50 120V Inverter/Charger
- Victron Orion XS 12/12-50A DC-DC charger
- Victron Cerbo GX MK2
- Victron Lynx Distributor (M10)
- Victron SmartSolar MPPT 100V / 50A solar charge controller
- Victron Smart BatteryProtect 100A
- Victron MEGA-Fuse up to 80V plus spares
- Solar PV Disconnect 250V DC 32A (2-pole)
- Blue Sea Systems Shore Power 30A breaker
- BEP Pro 770-EZ-Mount On/Off Battery Disconnect Switch 400A
- Blue Sea Systems 120V 4-position AC distribution panel
- 20-circuit DC fuse block with 16 low-amp circuits and 4 high-amp J-case circuits
- Peplink MAX BR1 Mini 5G with Wi-Fi
- 5-Port Industrial PoE Switch
This configuration is aimed at customers who want a serious 12V architecture with inverter/charger functionality, shore input, alternator charging, solar charging, AC distribution, DC distribution, and an integrated control path through ROAMiQ.
The 48V ROAMiQ × Victron STACK: Included Components
The current 48V ROAMiQ × Victron STACK includes the following major hardware and system elements:
- Modular Mounting Bracket
- ROAMiQ Control Hub
- 5 Zone Lighting Controller
- Victron MultiPlus-II 48/3000/35-50 120V Inverter/Charger
- Victron Orion-Tr 12/48-8A DC-DC charger
- Victron Cerbo GX MK2
- Victron Lynx Distributor (M10)
- Victron SmartSolar MPPT 100V / 20A solar charge controller
- Victron Smart BatteryProtect 100A
- Victron MEGA-Fuse up to 80V plus spares
- Solar PV Disconnect 250V DC 32A (2-pole)
- Two Blue Sea Systems Shore Power 30A breakers
- Victron Battery Switch On/Off 275A
- Blue Sea Systems 120V 4-position AC distribution panel
- Victron Orion-Tr 48/12-30A isolated DC-DC converter
- 20-circuit 12V/24V DC fuse block with 16 low-amp circuits and 4 high-amp J-case circuits
- Peplink MAX BR1 Mini 5G with Wi-Fi
- Two automated cooling fans
- 5-Port Industrial PoE Switch
- Template for easy placement and mounting
The 48V platform is important for customers who are moving toward higher-efficiency vehicle architectures and for projects that anticipate or require 48V-compatible loads and integrations.
Batteries and Display Screen: What Is and Isn’t Included
An important point to understand is that batteries are sold separately, and the ROAMiQ wall-mounted display screen is also sold separately.
That is intentional, and it's a reflection of how different real builds can be.
Battery bank selection varies based on energy goals, space constraints, chemistry preferences, budget, and charging strategy.
Likewise, regarding screen selection, some users may prefer to access the system from a phone or tablet, while others, in addition to accessing the system from a phone or tablet, also want a dedicated vehicle-mounted display.
Separating those choices makes the STACK system more adaptable across different customer types and build styles.
Why This Matters for Campervans, RVs, Fleet Vehicles, and Specialty Builds
The ROAMiQ × Victron STACK is unusually broad in its fit because it solves similar problems that exist in more than one market.
For High-End Campervans and RVs
It reduces electrical sprawl, improves serviceability, shortens install time, and creates a much cleaner path to smart control.
For Overland and Expedition Vehicles
It provides a compact, serious power platform that can be customized and integrated into a broader monitoring and control environment.
For Professional Upfitters and OEM Builders
It increases repeatability. That means fewer custom variations in layout, less wasted labor, more consistent service outcomes, and a more scalable build process.
For Fleet and Specialty Vehicles
It opens the door to standardization and, with supported integrations, remote visibility and control of important systems across distributed assets.
This is why the system is relevant not only to the vanlife market, but also to commercial and institutional vehicle applications.
Customization: This Is a Platform, Not a Dead-End Kit
One of the most important differentiators of the ROAMiQ × Victron STACK is that it is modular by design.
The platform is built so components can be swapped, upgraded, or reconfigured to fit a project’s specific needs.
- DC-DC charging configuration
- High-output alternator and regulator strategies
- Solar controller selection
- AC distribution layout
- DC distribution layout
- Networking and monitoring hardware
- Protection and disconnect hardware
- Extension wings for future expansion
Why ROAMiQ Makes the STACK More Than a Pre-Wired Board
A generic pre-wired power board saves labor, but it still stops at power.
ROAMiQ changes the approach by making the STACK part of a larger smart vehicle ecosystem.
That means you are not only buying a more efficient power deployment strategy. You are buying a path toward a more unified vehicle experience.
This is especially powerful for customers who want to tie supported HVAC, lighting, sensors, cameras, and monitoring devices into a single dashboard and automation environment.
Who This System Is Best For
DIY Builders Who Want Professional Results
If a customer wants serious Victron-based hardware but does not want to reinvent the internal architecture every time, the STACK offers a much cleaner path.
Professional Van Builders and Upfitters
For shops and production teams, repeatability is a major economic advantage. Standardized, bench-built systems reduce labor variance and make support easier.
Fleet and Specialty Vehicle Operators
For commercial, municipal, government, and specialty vehicle use cases, the combination of repeatable hardware and smart control is especially compelling.
Customers Who Care About Long-Term Expandability
If a buyer wants a system that can grow with additional smart integrations rather than trapping them in a static hardware path, the ROAMiQ × Victron STACK is a strong fit.
Comparison: Traditional Custom Build vs Closed Kit vs ROAMiQ × Victron STACK
Traditional Custom Build
- High flexibility
- High labor
- High install variability
- Often fragmented user experience
Closed Plug-and-Play Kit
- Easier install
- Less flexible
- Ecosystem lock-in
ROAMiQ × Victron STACK
- Bench-built and fast to deploy
- Uses trusted Victron architecture
- Designed for customization
- Supports a broader integration strategy through ROAMiQ
- Aims to unify the vehicle rather than just electrify it
Helpful Buying Questions Customers Should Ask Before Ordering
If you are evaluating the ROAMiQ × Victron STACK, these are the most important questions to answer first:
- Is my build better suited to 12V or 48V?
- What battery bank size am I planning to run?
- How much solar do I want to support?
- Am I relying on alternator charging?
- Do I want climate devices integrated into ROAMiQ now or later?
- Will I be adding cameras, tank sensors, or relays into the system?
- Do I want a dedicated display screen or mobile-only access?
- Is this a one-off build or something I need to repeat across multiple vehicles?
Frequently Asked Questions About the ROAMiQ × Victron STACK
What is the ROAMiQ × Victron STACK?
It is a pre-mounted, pre-wired, pre-configured, bench-built power, control and monitoring system built around Victron hardware and the ROAMiQ intelligence layer. It is available in both 12V and 48V versions.
Is the ROAMiQ × Victron STACK a complete vehicle electrical system?
Yes, it is a major power and control platform designed to be delivered ready to install. Batteries are sold separately, and the wall-mounted display screen is sold separately to allow the user to customize their system to their specific needs.
Is the ROAMiQ × Victron STACK just a pre-wired electrical board?
No. It is better understood as a full power and control platform. The system combines a Victron power architecture with ROAMiQ’s integration layer and a modular mounting strategy.
What is the difference between the 12V and 48V STACK?
The 12V version is built around a 12V architecture, while the 48V version uses a 48V backbone and includes different charging, conversion, and distribution hardware suited to that voltage class.
Are batteries included?
No. Batteries are sold separately to allow the user to choose their preferred batteries and capacity.
Is the ROAMiQ display included?
No. The wall-mounted display screen is sold separately, which gives customers flexibility in how they choose to access their system.
Can I use ROAMiQ with compatible products beyond the Victron power system?
Yes. The ROAMiQ-compatible products page lists a growing set of supported and coming-soon integrations across HVAC, fans, sensors, cameras, relays, and more.
Is the ROAMiQ × Victron STACK customizable?
Yes. The platform is modular, and multiple hardware elements can be swapped or configured based on your build requirements.
Who is this system for?
It is ideal for high-end campervans, RVs, overland vehicles, expedition builds, professional upfitters, OEM-style production teams, and fleet or specialty vehicle deployments.
Why is this better than a traditional wall-mounted Victron build?
The core benefits are reduced space usage, reduced wiring labor, improved repeatability, bench-built quality control, and a cleaner path to vehicle-wide smart control through ROAMiQ.
Final Thoughts: Why the ROAMiQ × Victron STACK Matters
The vehicle market does not need more disconnected devices pretending to be a system.
It needs better system architecture.
The ROAMiQ × Victron STACK matters because it attacks the real pain points from both sides at once:
- It solves installation pain with a bench-built, compact, pre-wired Victron platform.
- It solves user-experience pain with ROAMiQ’s smart control and integration layer.
That combination makes it more than a product launch. It makes it a category shift.
For builders, it creates a faster, cleaner, more repeatable deployment model.
For customers, it creates a more intelligent and unified way to interact with the vehicle.
And for the broader market, it offers something that has been badly needed: a serious alternative to both custom-wiring chaos and closed-ecosystem dead ends.
ROAMiQ × Victron STACK is not just a better install.
It is a better answer to how modern vehicle power and control should work.
